Talosbo S2 Cordless Robotic Pool Cleaner

$89.99
$109.99
Save $20.00
  • Automatic Pool Floor Cleaning: Cleans the pool floor automatically, removing dirt, sand, and small debris for everyday maintenance.
  • StreamlinedFlow Design: Optimizes water movement for energy-saving, high-efficiency debris removal.
  • Dual Filtration System: 180-micron filter screen plus 40 PPI sponge help capture both large debris and fine particles.
  • 90-Minute Runtime: Provides up to 90 minutes of continuous cleaning for pools up to 861 sq. ft.
  • Cordless One-Button Operation: No hoses or cords required; simple one-touch start for easy use.
  • Auto-Parking at Low Battery: Moves to the pool edge automatically when power is low for easy retrieval.
  • Lightweight Design:Weighs only 6.6 lb, making lifting, draining, and storage simple.
Free Shipping! Estimate delivery between Sat, Jan 24 - Wed, Jan 28
Color

Safe & Secure

Pay with Ease

American Express

Trusted Delivery

Title
  • Fast, Free Shipping

  • 30-Day Money-Back Guarantee

  • 1-Year Warranty Policy

  • Lifetime Customer Support

Built for Real Cleaning Power

Strong Suction with Smooth, Stable Drive

High-efficiency suction combined with a dual-motor drive system delivers consistent debris pickup and stable movement across flat pool surfaces.

Deeper Surface Cleaning

Dual-Layer Filtration for Superior Cleaning

The dual-layer filtration system efficiently captures both fine particles and larger debris, improving overall surface cleaning performance for clearer water.

Effortless Operation

Designed for Simple, Stress-Free Use

A lightweight body and one-touch operation simplify every cleaning session—easy to start, easy to handle, and effortless to use.

Worry-Free Finishing

Smart Auto-Parking at the Pool Edge

After cleaning or when battery runs low, the robot automatically parks near the pool edge—no searching, no extra effort.

Minimal Maintenance

Easy Cleaning, Ready for Reuse

The filter and internal components rinse clean in seconds, keeping maintenance simple and ensuring the cleaner is always ready for the next cycle.

Built for Efficient Coverage

Fast Charging with Wide Cleaning Coverage

Fully recharges in just 2.5 hours and is capable of covering up to 861 sq. ft.

Compatible With Most Pool Types

Works with flat above-ground and inground pools of various shapes.

Specs

Types of Pools

Ideal Pool Type

Flat In-ground& Above-ground

Title

Pool Size

861Sq.Ft (80㎡) 

Title

Pool Cleaning Coverage

Pool Floor only 

Title

Pool Shape

All Shapes

Title

Performance

Motor

1 x Drive   1 x Pump

Title

Scrubbing Type

Suction and 2 Bottom Brushes

Title

Filtration Spec

Level-1: 180μm Fine Filter Tray ;Level-2: 40 PPI Filter Foam

Title

Filter Basket

Chasis Tray 2L

Title

Cleaning Cycle

Battery Life

Up to 90 Minutes

Title

Charging Time

2.5 hours

Title

Battery Capacity

3200 mAh

Title

Frequently Asked Questions

Why did the device not run for the full 90 minutes?

The device has a maximum runtime of 90 minutes, but when the battery

level drops below 15%, it automatically pulls over to allow for easy retrieval. If you continue to experience poor battery performance, even after ensuring it is fully charged before each use, please contact customer service.

Why does the device only move in one direction and not reverse when it hits a wall?

Check for motor issues or blockages in the water intakes. If there are no

issues, it could be a sensor or motor fault. Please contact customer service for assistance.

Why does my device stop frequently or get stuck?

The device is optimized for flat pool surfaces. If your pool is uneven or has bumps, the device may not perform optimally. Ensure the water intakes and wheels are not clogged, and that the device is not getting stuck on the pool's drain.

Why is the device slowing down, and the collected debris is reduced?

We recommend cleaning the flter tray before use. Using a full or partially full filter tray can cause a decrease in speed and suction.If your pool is particularly dirty, manually clean it before using the device for regular cleaning to prevent excessive dirt buildup.

What should I do if the charging pins are corroded?

After each use and before charging, wipe the charging port with a tissue or cloth. If the charging pins are corroded,you will need to contact us to replace the drive kit.

See All FAQs

Can't find an answer to your question?

Call us at 1-(833) 6856101 or email us at supportus@talosbo.com

Thanks for contacting us. We'll get back to you as soon as possible.

Email address*

Your question*

Talosbo S2 Cordless Robotic Pool Cleaner

$89.99

Special Launch Offer